High Response Acceleration Transducer
ARJ-A High response Acceleration Transducer 50 to 2000m/s2
The ARJ-A acceleration transducer is small in size and has highly responsive characteristics. It is developed to measure the acceleration of machines, vehicles, ships, civil engineering structures, buildings, and so forth.
Protection ratings : IP 61 equivalent
Features
- Compact
- Easy Handling
Specifications
| Type | Capacity | Rated output | Non-linearity | Temperature range |
|---|---|---|---|---|
| ARJ-50A | 50 m/s 2 | Approx. 0.5 mV/V (1000x10-6 strain) | 1 %RO | -10 to +60 °C |
| ARJ-100A | 100 m/s 2 | -10 to +50 °C | ||
| ARJ-200A | 200 m/s 2 | |||
| ARJ-500A | 500 m/s 2 | |||
| ARJ-1000A | 1000 m/s 2 | |||
| ARJ-2000A | 2000 m/s 2 |
Output polarity
Measurement moves in the plus direction when acceleration occurs in the acceleration transducer itself toward the “+” mark on the casing. .
ARJ-A-D High response Bi-axial Acceleration Transducer 50 to 2000 m/s2 (made-to-order)
This acceleration transducer was developed for measurement of acceleration in the machinery, automobile, ship, civil engineering/architecture, and other fields. It is designed to be small and lightweight so that installation does not disturb the vibration mode of the object being measured.
Protection ratings : IP 61 equivalent
- Compact
- Easy handling
- Bi-axial measurement with the same size as ARJ-A uni-axial model
Specifications
| Type | Capacity | Rated output | Non-linearity | Temperature range |
|---|---|---|---|---|
| ARJ-50A-D | 50 m/s 2 | Approx. 0.5 mV/V (1000x10-6 strain) | 1 %RO | -10 to +60 °C |
| ARJ-100A-D | 100 m/s 2 | -10 to +50 °C | ||
| ARJ-200A-D | 200 m/s 2 | |||
| ARJ-500A-D | 500 m/s 2 | |||
| ARJ-1000A-D | 1000 m/s 2 | |||
| ARJ-2000A-D | 2000 m/s 2 |
Output polarity
Measurement moves in the plus direction when acceleration occurs in the acceleration transducer itself toward the “+” mark on the casing.
ARJ-A-T High response Tri-axial Acceleration Transducer 50 to 2000 m/s2
The ARJ-A-T acceleration transducer was developed to measure the acceleration of machines, vehicles, ships, civil engineering structures, buildings, and so forth. It is designed as a small and lightweight transducer so that it can be installed without disturbing the vibration mode of the object to be measured.
Protection ratings : IP 61 equivalent
Features
- Compact
- Easy Handling
- Compared to conventional models, achieves 1/3 the weight and 1/8 the volume
Specifications
| Type | Capacity | Rated output | Non-linearity | Temperature range |
|---|---|---|---|---|
| ARJ-50A-T | 50 m/s 2 | Approx. 0.5 mV/V (1000x10-6 strain) | 1 %RO | -10 to +60 °C |
| ARJ-100A-T | 100 m/s 2 | -10 to +50 °C | ||
| ARJ-200A-T | 200 m/s 2 | |||
| ARJ-500A-T | 500 m/s 2 | |||
| ARJ-1000A-T | 1000 m/s 2 | |||
| ARJ-2000A-T | 2000 m/s 2 |
Output polarity
Measurement moves in the plus direction when acceleration occurs in the acceleration transducer itself toward the “+” mark on the casing. .
Small High-response High-capacity Single-axis Acceleration Transducer ARGH-A 500m/s2 to 2000m/s2
The ARGH-A is a small and high-response acceleration transducer incorporating a MEMS-based acceleration sensor. Its small, light-weight and robust structure allows the use of this transducer for the measurement in various fields such as machines, vehicles, ships, civil engineering and construction. This transducer can easily be used by merely connecting it to our dc-exciting dynamic strain meter without using an external power supply.
Protection ratings : IP 61 equivalent
- Small and light-weight
- Wide frequency response range
- Dedicated to single-axis measurement
- Allowable overload is larger than that of strain gauge type acceleration transducer
- Measurement possible from DC level
- No need of external power supply; Measured just being connected to an instrument
- Output level equal to a strain gauge type acceleration transducer obtained by the built-in amplifier
Specifications
| Type | Capacity | Rated output | Non-linearity | Temperature range |
|---|---|---|---|---|
| ARGH-500A | 500m/s 2 | Equivalent to 1800×10-6 strain ±10% | 2 %RO | |
| ARGH-1000A | 1000m/s 2 | -10 ~ +60°C | ||
| ARGH-2000A | 2000m/s 2 |
Output polarity
Measurement moves in the plus direction when acceleration occurs in the acceleration transducer itself toward the “+” mark on the casing.
Small High-response Low-capacity Single-axis Acceleration Transducer ARGL-A 20 to 200m/s2
The ARGL-A is a small and high-response acceleration transducer incorporating a MEMS-based acceleration sensor. Its small, light-weight and robust structure allows the use of this transducer for the measurement in various fields such as machines, vehicles, ships, civil engineering and construction. This transducer can easily be used by merely connecting it to our dc-exciting dynamic strain meter without using an external power supply.
Protection ratings : IP 61 equivalent
- Small and light-weight
- Wide frequency response range
- Dedicated to single-axis measurement
- Allowable overload is larger than that of strain gauge type acceleration transducer
- Measurement possible from DC level
- No need of external power supply; Measured just being connected to an instrument
- Output level equal to a strain gauge type acceleration transducer obtained by the built-in amplifie
Specifications
| Type | Capacity | Rated output | Non-linearity | Temperature range |
|---|---|---|---|---|
| ARGL-20A | 20m/s 2 | Equivalent to 800×10-6 strain ±15% | 2 %RO | |
| ARGL-40A | 40m/s 2 | -10 ~ +60°C | ||
| ARGL-100A | 100m/s 2 | |||
| ARGL-200A | 200m/s 2 |
Output polarity
Measurement moves in the plus direction when acceleration occurs in the acceleration transducer itself toward the “+” mark on the casing.
Small High-response Low-capacity Tri-axial Acceleration Transducer ARGL-A-T 20m/s2 to 200m/s2
The ARGL-A-T is a small and high-response acceleration transducer incorporating a MEMS-based acceleration sensor. Its small, light-weight and robust structure allows the use of this transducer for the measurement in various fields such as machines, vehicles, ships, civil engineering and construction. This transducer can be just connected to our dc-exciting dynamic strain meter and measured without the need of an external power supply.
Protection ratings : IP 61 equivalent
- Small and light-weight
- Measurement in 3-directions possible with the same size as a uni-axial model
- Excellent temperature characteristics and frequency response
- Wide frequency response range
- Outputs of 3-directions are measured by one input/output cable
- Robustness with allowable overload larger than that of a strain gauge type acceleration transducer
- Measurement possible from DC level
- Output level equal to a strain gauge type acceleration transducer is obtained by the built-in amplifier
- Sensitivity loss is not caused by an extension cable
Specifications
| Type | Capacity | Rated output | Non-linearity | Temperature range |
|---|---|---|---|---|
| ARGL-20A-T | 20m/s 2 | Equivalent to 800×10-6 strain ±15% | 2 %RO | -10 ~ +60°C |
| ARGL-40A-T | 40m/s 2 | |||
| ARGL-100A-T | 100m/s 2 | |||
| ARGL-200A-T | 200m/s 2 |
Output polarity
Measurement moves in the plus direction when acceleration occurs in the acceleration transducer itself toward the “+” mark on the casing.
Small High-response Low-capacity Tri-axial Acceleration Transducer ARGH-A-T 500m/s2 to 1000m/s2
The ARGH-A-T is a small and high-response acceleration transducer incorporating a MEMS-based acceleration sensor. Its small, light-weight and robust structure allows the use of this transducer for the measurement in various fields such as machines, vehicles, ships, civil engineering and construction. This transducer can easily be used by merely connecting it to our dc-exciting dynamic strain meter without using an external power supply.
Protection ratings : IP 61 equivalent
- Small and light-weight
- Measurement in 3-directions possible
- Excellent temperature characteristics and frequency response
- Wide frequency response range
- Robustness with allowable overload larger than that of a strain gauge type acceleration transducer
- Measurement possible from DC level
- Output level equal to a strain gauge type acceleration transducer is obtained by the built-in amplifier
- Sensitivity loss is not caused by an extension cable
Specifications
| Type | Capacity | Rated output | Non-linearity | Temperature range |
|---|---|---|---|---|
| ARGH-500A-T | 500m/s 2 | Equivalent to 1800×10-6 strain ±10% | 2 %RO | -10 ~ +60°C |
| ARGH-1000A-T | 1000m/s 2 |
Output polarity
Measurement moves in the plus direction when acceleration occurs in the acceleration transducer itself toward the “+” mark on the casing.