High capacity Acceleration Transducer
ARE-A High capacity Acceleration Transducer 1000 to 10000m/s2
The ARE-A acceleration transducer is used to measure the acceleration of structures subject to relatively strong vibration. It is small, lightweight and easy to operate.
Protection ratings : IP 61 equivalent
Features
- Compact
- Easy to install
Specifications
| Type | Capacity | Rated output | Non-linearity | Temperature range |
|---|---|---|---|---|
| ARE-1000A | 10 m/s² | Approx. 0.5 mV/V (1000×10⁻⁶ strain) | 1 %RO | -10 to +50 °C |
| ARE-2000A | 20 m/s² | |||
| ARE-5000A | 50 m/s² | |||
| ARE-10000A | 100 m/s² |
Output polarity
Measurement moves in the plus direction when acceleration occurs in the acceleration transducer itself toward the “+” mark on the casing.
ARE-A-T High capacity Tri-axial Acceleration Transducer 1000 to 5000m/s2
This compact and high-capacity acceleration transducer combines each of the 3 component directions in its casing, allowing simultaneous measurement of acceleration in 3 directions.
Protection ratings : IP 61 equivalent
Features
- Simultaneous measurement in 3 directions
- Less mutual interference
- Easy to install
Specifications
| Type | Capacity | Rated output | Non-linearity | Temperature range |
|---|---|---|---|---|
| ARE-1000A-T | 1000 m/s2 | Approx. 0.5 mV/V (1000×10-6 strain) |
1 %RO | -10 to +50 °C |
| ARE-2000A-T | 2000 m/s2 | |||
| ARE-5000A-T | 5000 m/s2 | -10 to +60 °C |
Output polarity
Measurement moves in the plus direction when acceleration occurs in the acceleration transducer itself toward the “+” mark on the casing. .